Medtronic Onyx 18 Liquid Embolic System (LES kit) | REF 105-7100-060
Medtronic Onyx 18 Liquid Embolic System (LES) kit, REF 105-7100-060, is a non-adhesive liquid embolic agent supplied with DMSO solvent for endovascular embolization procedures.
The Terumo Neuro RePHIL PHIL 30% Kit (Medium / 36 cSt), REF LEN10300RE, is a precipitating hydrophobic injectable liquid (PHIL) embolic agent kit designed for endovascular embolization. The 30% concentration provides a medium viscosity formulation (36 cSt) intended to give interventionalists predictable handling characteristics when delivered through compatible DMSO-resistant microcatheters. As a non-adhesive liquid embolic, it is formulated to precipitate on contact with blood, allowing controlled cast formation within the targeted vasculature.
Key Features
Non-adhesive precipitating liquid embolic agent based on a hydrophobic polymer dissolved in DMSO.
30% polymer concentration with a medium viscosity of 36 cSt for balanced penetration and control.
Integrated iodine-based radiopacity intended to reduce reliance on added tantalum powder and to support continuous fluoroscopic visualization.
Supplied as a kit configuration for single-patient procedural use.
Designed for delivery through DMSO-compatible microcatheters.
Clinical Applications
Intended for endovascular embolization procedures performed by trained interventional specialists. Specific indications, patient selection criteria, contraindications and procedural technique are defined by the manufacturer's Instructions for Use and applicable local regulatory clearances. Not specified in the located sources whether all indications are uniformly approved across regions; refer to the official IFU for the authoritative indication statement in your market.
Product Information
Brand: Terumo Neuro
Product: RePHIL PHIL 30% Kit
Viscosity: 36 cSt (Medium)
Polymer concentration: 30%
REF / UPN: LEN10300RE
Category: Liquid Embolic Agents
Configuration: Kit
Solvent system: DMSO-based (requires DMSO-compatible delivery microcatheter)
Radiopacity: Inherent iodine-based radiopacity
Sterility / single use: Not specified in the located sources; consult the official IFU
Storage conditions: Not specified in the located sources; consult the official IFU
Shelf life: Not specified in the located sources; consult the official IFU
REF / UPNLEN10300RE
Size
Terumo Neuro RePHILPHIL 30% kitLEN10300REprecipitating hydrophobic injectable liquidliquid embolic agentnon-adhesive embolicmedium viscosity embolic 36 cStendovascular embolizationDMSO compatible emboliciodine radiopaque embolicneurointerventional embolic agentinterventional radiology embolicTerumo Neuro liquid embolicB2B medical device sourcingneurovascular embolization kit
Related Products
Related products from the same category
Medtronic Onyx 34 Liquid Embolic System (LES kit) | REF 105-7100-080
Medtronic Onyx 34 Liquid Embolic System (LES) kit, REF 105-7100-080, a non-adhesive ethylene vinyl alcohol (EVOH) copolymer liquid embolic agent supplied with DMSO solvent for endovascular embolization procedures.
Medtronic Onyx LES Vial Mixer | REF 103-1205-001
Medtronic Onyx LES Vial Mixer (REF 103-1205-001) — accessory device intended to agitate and homogenize Onyx Liquid Embolic System vials prior to endovascular use.
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt) | REF LEN10250
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt), REF LEN10250 — precipitating hydrophobic injectable liquid embolic agent supplied as a starter kit configuration for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit (Medium / 36 cSt) | REF LEN10300
Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit, medium viscosity (36 cSt), REF LEN10300 — precopolymer-based non-adhesive liquid embolic agent for endovascular embolization procedures.
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High / 72 cSt) | REF LEN10350
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High viscosity, 72 cSt), REF LEN10350 — precipitating hydrophobic injectable liquid embolic for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low / 12 cSt) | REF LEN10LV250
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low viscosity, 12 cSt) — REF LEN10LV250. Precision liquid embolic kit for neurovascular and peripheral embolization workflows.
Terumo Neuro RePHIL PHIL 25% Kit (Standard / 16 cSt) | REF LEN10250RE
Terumo Neuro RePHIL 25% liquid embolic kit (Standard, 16 cSt) for endovascular embolization, supplied as a single-use sterile kit (REF LEN10250RE).
Terumo Neuro RePHIL PHIL 35% Kit (High / 72 cSt) | REF LEN10350RE
Terumo Neuro RePHIL PHIL 35% Kit (High viscosity, 72 cSt) — precipitating hydrophobic injectable liquid embolic, REF LEN10350RE.
Terumo Neuro RePHIL PHIL LV Kit (Low / 12 cSt) | REF LEN10LV250RE
Terumo Neuro RePHIL PHIL LV Kit (Low viscosity, 12 cSt) precipitating hydrophobic injectable liquid embolic system for peripheral embolization, supplied as a single-use kit (REF LEN10LV250RE).
Buyer support
Frequently asked questions about Terumo Neuro RePHIL PHIL 30% Kit (Medium / 36 cSt) | REF LEN10300RE
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.