Medtronic Onyx 18 Liquid Embolic System (LES kit) | REF 105-7100-060
Medtronic Onyx 18 Liquid Embolic System (LES) kit, REF 105-7100-060, is a non-adhesive liquid embolic agent supplied with DMSO solvent for endovascular embolization procedures.
The Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit (Medium / 36 cSt), REF LEN10300, is a precipitating hydrophobic injectable liquid (PHIL) non-adhesive embolic agent intended for use in endovascular embolization procedures. The 30% concentration with a medium viscosity of 36 cSt is designed to provide a balance between distal penetration and controlled cast formation when delivered through compatible DMSO-resistant microcatheters under fluoroscopic visualization.
Key Features
- Precipitating hydrophobic injectable liquid (PHIL) copolymer technology
- 30% polymer concentration formulation
- Medium viscosity rating of 36 cSt for balanced flow and control
- Inherently radiopaque — eliminates the need for added tantalum powder or agitation
- Non-adhesive embolic behavior to support controlled delivery
- Supplied as a starter kit configuration for procedural setup
- Designed for delivery through DMSO-compatible microcatheters under fluoroscopic guidance
Clinical Applications
- Endovascular embolization of lesions in the peripheral and neurovasculature as defined by the manufacturer's Instructions for Use
- Procedures requiring a non-adhesive liquid embolic with controlled cast formation
- Cases where inherent radiopacity supports continuous fluoroscopic visualization during injection
Refer to the manufacturer's IFU for the complete list of indications, contraindications, warnings, and precautions applicable to your region.
Product Information
- Brand: Terumo Neuro
- Product: PHIL 30% Liquid Embolic System Starter Kit
- Viscosity: Medium (36 cSt)
- Polymer Concentration: 30%
- REF / UPN: LEN10300
- Category: Liquid Embolic Agents
- Kit Contents: Not specified in the located sources
- Sterility: Not specified in the located sources
- Storage Conditions: Not specified in the located sources
- Shelf Life: Not specified in the located sources
- Regulatory Status: Refer to manufacturer documentation for region-specific clearances and approvals
REF / UPNLEN10300
Size
Terumo Neuro PHILPHIL liquid embolicPHIL 30%LEN10300liquid embolic systemnon-adhesive embolic agentprecipitating hydrophobic injectable liquidendovascular embolizationneurovascular embolizationDMSO compatible embolicradiopaque liquid embolicmedium viscosity embolic 36 cStTerumo Neuro embolicliquid embolic starter kitinterventional radiology embolic agent
Related Products
Related products from the same category
Medtronic Onyx 34 Liquid Embolic System (LES kit) | REF 105-7100-080
Medtronic Onyx 34 Liquid Embolic System (LES) kit, REF 105-7100-080, a non-adhesive ethylene vinyl alcohol (EVOH) copolymer liquid embolic agent supplied with DMSO solvent for endovascular embolization procedures.
Medtronic Onyx LES Vial Mixer | REF 103-1205-001
Medtronic Onyx LES Vial Mixer (REF 103-1205-001) — accessory device intended to agitate and homogenize Onyx Liquid Embolic System vials prior to endovascular use.
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt) | REF LEN10250
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt), REF LEN10250 — precipitating hydrophobic injectable liquid embolic agent supplied as a starter kit configuration for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High / 72 cSt) | REF LEN10350
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High viscosity, 72 cSt), REF LEN10350 — precipitating hydrophobic injectable liquid embolic for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low / 12 cSt) | REF LEN10LV250
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low viscosity, 12 cSt) — REF LEN10LV250. Precision liquid embolic kit for neurovascular and peripheral embolization workflows.
Terumo Neuro RePHIL PHIL 25% Kit (Standard / 16 cSt) | REF LEN10250RE
Terumo Neuro RePHIL 25% liquid embolic kit (Standard, 16 cSt) for endovascular embolization, supplied as a single-use sterile kit (REF LEN10250RE).
Terumo Neuro RePHIL PHIL 30% Kit (Medium / 36 cSt) | REF LEN10300RE
Terumo Neuro RePHIL PHIL 30% Kit (Medium viscosity, 36 cSt) liquid embolic system, REF LEN10300RE, supplied as a precipitating non-adhesive embolic agent for endovascular embolization procedures.
Terumo Neuro RePHIL PHIL 35% Kit (High / 72 cSt) | REF LEN10350RE
Terumo Neuro RePHIL PHIL 35% Kit (High viscosity, 72 cSt) — precipitating hydrophobic injectable liquid embolic, REF LEN10350RE.
Terumo Neuro RePHIL PHIL LV Kit (Low / 12 cSt) | REF LEN10LV250RE
Terumo Neuro RePHIL PHIL LV Kit (Low viscosity, 12 cSt) precipitating hydrophobic injectable liquid embolic system for peripheral embolization, supplied as a single-use kit (REF LEN10LV250RE).
Buyer support
Frequently asked questions about Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit (Medium / 36 cSt) | REF LEN10300
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.