Synergy Shield Coronary Stent 2.50 X 8 | REF H7493966608250
Boston Scientific Synergy Shield Coronary Stent, 2.50 mm x 8 mm (REF H7493966608250) for B2B medical device procurement.
The MicroPort Firehawk Rapamycin Target Eluting Coronary Stent System (REF RV3038) is a sirolimus (rapamycin) target-eluting coronary stent pre-mounted on a rapid-exchange percutaneous transluminal coronary angioplasty delivery catheter. This 3.00 mm x 38 mm configuration is intended for B2B medical device procurement and catalog listing for qualified hospital, cath-lab, and distributor buyers.
Key Features
Cobalt-chromium L605 stent platform engineered for a thin strut profile and high radial strength.
Abluminal grooved reservoir design that localizes the drug coating to the vessel-wall-facing surface of the stent.
Biodegradable polymer carrier loaded with sirolimus (rapamycin) for targeted, controlled drug release.
Pre-mounted on a low-profile rapid-exchange (monorail) delivery catheter with two radiopaque balloon markers.
Open-cell stent geometry intended to support side-branch access and conformability to vessel anatomy.
Clinical Applications
Indicated use, patient selection, lesion suitability, and procedural technique must follow the current manufacturer Instructions for Use (IFU) and applicable local regulatory labeling.
Typically catalogued for percutaneous coronary intervention (PCI) workflows in interventional cardiology cath labs.
Final clinical decisions, including vessel sizing and treatment strategy, remain the responsibility of the treating physician.
Product Information
Brand: MicroPort
Product line: Firehawk Rapamycin Target Eluting Coronary Stent System
Category: Coronary Stents (Drug-Eluting)
REF / UPN: RV3038
Stent diameter: 3.00 mm
Stent length: 38 mm
Stent material: Cobalt-chromium alloy (L605)
Active drug: Sirolimus (rapamycin)
Polymer: Biodegradable abluminal coating
Delivery system: Rapid-exchange (monorail) PTCA catheter
Sterility: Supplied sterile, single use; do not resterilize
Guide wire compatibility: Not specified in the located sources
Guide catheter compatibility: Not specified in the located sources
Rated burst pressure: Not specified in the located sources
Nominal / maximum inflation pressure: Not specified in the located sources
Shelf life: Not specified in the located sources
Regulatory status: Refer to current manufacturer documentation for region-specific clearances and approvals.
REF / UPNRV3038
Size38 mm
MicroPort FirehawkFirehawk stentRV3038MicroPort RV3038coronary stent 3.00 x 38 mmdrug-eluting stentsirolimus eluting stentrapamycin target eluting stentcobalt chromium coronary stentbiodegradable polymer DESrapid exchange PTCA stentinterventional cardiology stentPCI coronary stentcath lab stent supplyB2B medical device procurement
How It Works
1
Submit Your Request
Tell us what product you need and share a few details.
2
We Match You
We connect your request with the most relevant verified brands.
3
Receive Offers
Relevant supplier options can respond with availability, documentation context, and quote details.
Related Products
Related products
Synergy Shield Coronary Stent 2.75 X 8 | REF H7493966608270
Boston Scientific Synergy Shield Coronary Stent, 2.75 mm x 8 mm (REF H7493966608270), available for B2B medical device procurement.
Synergy Shield Coronary Stent 3.00 X 8 | REF H7493966608300
Boston Scientific Synergy Shield Coronary Stent (3.00 mm x 8 mm), REF H7493966608300, supplied for B2B procurement.
Synergy Shield Coronary Stent 3.50 X 8 | REF H7493966608350
Boston Scientific Synergy Shield Coronary Stent, 3.50 mm x 8 mm (REF H7493966608350) for B2B medical device procurement.
Synergy Shield Coronary Stent 4.00 X 8 | REF H7493966608400
Boston Scientific Synergy Shield Coronary Stent, 4.00 mm x 8 mm (REF H7493966608400) for B2B medical device procurement.
Synergy Shield Coronary Stent 2.25 X 12 | REF H7493966612220
Boston Scientific Synergy Shield Coronary Stent, 2.25 mm x 12 mm (REF H7493966612220) for B2B medical device procurement.
Synergy Shield Coronary Stent 2.50 X 12 | REF H7493966612250
Boston Scientific Synergy Shield Coronary Stent, 2.50 mm x 12 mm (REF H7493966612250) for B2B medical device procurement.
Synergy Shield Coronary Stent 2.75 X 12 | REF H7493966612270
Boston Scientific Synergy Shield Coronary Stent, 2.75 mm x 12 mm (REF H7493966612270) for B2B medical device procurement.
Synergy Shield Coronary Stent 3.00 X 12 | REF H7493966612300
Boston Scientific Synergy Shield Coronary Stent, 3.00 mm x 12 mm (REF H7493966612300) for B2B medical device procurement.
Synergy Shield Coronary Stent 3.50 X 12 | REF H7493966612350
Boston Scientific Synergy Shield Coronary Stent, 3.50 mm x 12 mm (REF H7493966612350) for B2B medical device procurement.
Synergy Shield Coronary Stent 4.00 X 12 | REF H7493966612400
Boston Scientific Synergy Shield Coronary Stent, 4.00 mm x 12 mm, REF H7493966612400, supplied for B2B procurement.
Synergy Shield Coronary Stent 4.50 X 12 | REF H7493966612450
Boston Scientific Synergy Shield Coronary Stent, 4.50 mm x 12 mm (REF H7493966612450) for B2B medical device procurement.
Synergy Shield Coronary Stent 5.00 X 12 | REF H7493966612500
Boston Scientific Synergy Shield Coronary Stent, 5.00 mm x 12 mm (REF H7493966612500), supplied for B2B medical device procurement.
Synergy Shield Coronary Stent 2.25 X 16 | REF H7493966616220
Boston Scientific Synergy Shield Coronary Stent, 2.25 mm x 16 mm (REF H7493966616220), supplied for B2B procurement.
Buyer support
Frequently asked questions about MicroPort Firehawk 3.00 × 38 mm | REF RV3038
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.